Simrad V3100 - Power Cable Connection

20 |
Installation | V3100 User Manual
Connecting power cable
Connect the V3100 to vessel´s power source as illustrated below.
The device requires a 12V or 24V DC power supply (9.6 to 31.2V)
capable of supplying 2A peak current @12V DC. Always use a
minimum 3A fuse panel before connecting directly to battery or
power supply. Power on the power source will turn on the device
unit automatically.
V3100´s power cables are marked with bullet connectors.
12pin 8pin
Power and alarm connections
Common
Power GND
Normally Open
Normally Close
Power GND
DC 12/24V
White
Brown
Blue
Red
Black
Yellow
Power Supply -
Black Bullet Connector
Green
Orange
External Alarm
DC 12/24V
Frame GND
Power Supply +
Red Bullet Connector