DC Inverter UNI SPLIT Series
Duct
Type Unit
41
Buckle magnetic
ring
shall be added in the power line communication cord of
outdoor and indoor unit. The added buckle magnetic ring shall be fixed at the outlet
of power line communication cord near the outdoor unit side; detailed operation step
for the magnetic buckle is as follow:
1)
Limit
the
fixation
location
of
buckle
magnetic
ring
at
the
outlet
of
power
line
communication
cord
near
the
outdoor
unit
side
with
a
cable tie (refer to the mark
4
in the following picture) to prevent the
buckle magnetic ring from sliding along the power line communication
cord;
2)
Then
clasp
the
buckle
magnetic
ring
to
the
location
of
power
line
communication cord confirmed with cable tie, after that, re-fix it with a
cable tie
(refer to the mark
3
in the following picture)
(Note
：
Only
for
ASGE-48BI2-3 units.)
To Next Page
Loading...
