1.The outline figure on cover is for reference only, which
may differ from what you purchased.
2. Make sure to read chapter PRECAUTIONS before
you operate the air conditioner.
3. This manual is available for model R05/BG.
4. R05/BGE can be applicable for cool only type and
cool&heat type air conditioners.
NOTE
PRECAUTIONS
Curtain, door or the like objects will prevent the remote signal from
being received by air conditioner.
Do not get the interior of remote controller wet. It is forbidden to expose
it to direct sunlight or locate it in the place with high temp.
Malfunction may occur if infrared signal receiver on air conditioner is
exposed to sunlight. Please shelter the signal receiver from sunlight
with curtain.
Please remove the nearby electronic device for they may affect the
performance of remote controller. If necessary, contact the local Sinclair
service centre or technical support centre.
Do not put the used or different batteries into the remote controller,
otherwise remote controller will fail to send signal.
Please remove the batteries before long period unused, otherwise the
remote controller may be damaged.
If pressing the button reset the remote controller, which indicates low
battery, please replace the batteries.
If no receiving sound is heard from indoor unit or on remote controller
does not flash, please replace the batteries.
Effective transmitting distance of remote controller is 8m, please aim the
signal sending part to the receiver on air conditioner.
MODEL AND SPECIFICATION
Model
Rated voltage
Min voltage for sending signal of CPU
Effective receiving distance
Operation condition
R05/BGE
3.0V(2 pieces of LR03 7# batteries)
2.4V
O
-5~60 C
8m 11m
REMOTE CONTROLER
To Next Page
Loading...
