Sinclair ASGE-18AI - Page 200

DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
183
Removal of Front Case
Remark: Before removal, please make sure that the power supply has been cut off. During removal, please
protect the parts properly.
Step Illustration Handling Instruction
1. Remove the
fixing screws
between cover
plates
●Disassemble the
fastening screws
between right and
left panels and
upper cover plates.
Disassemble right
and left panels. (As
is shown in the
graph, circle
represents screws. )
2. Remove the
front case
● The front case
after removal is as
shown on left.