DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
185
Disassembly of panel parts
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during
disassembly. Do not scratch the outer parts.
Step Illustration Handling Instruction
Disassembly of
panel parts
●Disassemble the 8
screws shown by
the arrow in the
graph with
screwdriver (two on
both right and left
and 4 in the front)
and then remove
the panel parts.
Disassembly of electrical parts box components
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during
disassembly, especially the components inside the box in case of water and hit.
Step Illustration Handling Instruction
1.
Disassembly
of electrical
parts box
cover panel
●Disassemble 2
screws as shown by
the arrow in the
graph on left and
remove the
electrical parts box
cover panel.
To Next Page
Loading...
