DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
186
2.
Disassembly
of electrical
parts box
modules.
●Disassemble 4
screws as shown by
the arrow in the
graph on left (two
screws on both
sides)and remove
the electrical parts
box modules and
the wires.
Disassembly of air deflecting plate modules
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during
disassembly, especially the joints of the air deflecting plate.
Step Illustration Handling Instruction
Disassembly
of air
deflecting
plate
modules
●Remove the air
deflecting plates
from the air
deflecting plate
support assembly,
and then remove
both ends from the
air sweeping motor.
joint (As is shown in
the graph, arrow
represents the
support assembly
and circle the air
sweeping motor
joint.)
Disassemble of water-containing plate modules
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during
disassembly.
Step Illustration Handling
Instruction
To Next Page
Loading...
