Sinclair ASV-35BS - Page 13

- 7 -
Sleep function
When selecting sleep function, sleep icon " "
flashes for 5s; press " SET " button within 5s to
turn on sleep function and " " icon is displayed
on remote controller. Press " SET " button again
within 5s to turn off sleep function and " " icon
disappears.
TIMER OFF function
Light function
Hold "+" or "-" button, 2s later, the time will change
quickly until reaching your required time.Press
"SET" button to confirm it within 5S. The word
"ON" will stop blinking.
Cancel TIMER ON: Press "MENU" button to
TIMER ON function and the characters "ON" flash-
es on the remote controller; press "SET" button
until the characters "ON" disappears.
●
NOTE
Some menu’s function may be unavailable under
different models.
MENU button
blank
No Setting
When selecting light function, light icon " "
flashes for 5s; press "SET" button within 5s to
turn off display light on indoor unit and " " icon
on remote controller disappears. Press “SET”
button again within 5s to turn on display light and
" " icon is displayed.
Press this button to select submenu function and
then press
"SET" button to set the function
status of submenu. The submenu can be select-
ed circularly as follows:
TIMER
OFFON
TIMER
Ambient temperature display function
When selecting ambient temperature display
function, icon
" " flashes for 5s; press "SET"
display on or off. After setting function on, the
"
button within 5s to select ambient temperature
" icon will be displayed on remote controller
and you can see indoor ambient temperature on
indoor unit's displayer for a few seconds.
CLOCK function
TIMER OFF function can set the time for timer off.
Under TIMER OFF function status
," " icon
disappears and the word "OFF" on remote control-
ler blinks. Press "+" or "-" button to adjust TIMER
OFF setting. After each pressing "+" or "-" button
TIMER OFF setting will increase or decrease 1min.
Hold "+" or "-" button, 2s later, the time will change
quickly until reaching your required time, press
"SET" button to confirm it within 5S. The word
"OFF" will stop blinking.
Cancel TIMER OFF: Press "MENU" button to
TIMER OFF function and the characters "OFF"
flashes on the remote controller; press "SET"
button until the characters "OFF" disappears.
LED button
Press this button can turn on or turn off the LED light
on the panel.
up & down swing function
Not available for this unit.
CLOCK function can se t
indi
clock
"
t ime. Under
CLOCK function status, " " icon on remote con-
troller will blink. Press "+" or "-" button within 5s to
set clock time. Each pressing of "+" or "-" button,
clock time will increas e or decrease 1 min. If hold
"+" or "-" button , 2s later, time will change quick-
ly. Release this button when reaching your
required time, press "SET" button to confirm it
within 5S. The " " icon will stop blinking.
TIMER ON function
TIMER ON function can set the time for timer on.
Under TIMER ON function status
," " icon disap-
pears and the word "ON" on remote controller
blinks. Press "+" or "-" button to adjust TIMER ON
setting. After each pressing "+" or "-" button
TIMER ON setting will increase or decrease 1min.