Sinclair ASV-35BS - Error Code

- 20 -
●
ation of error code.
Error code
Error code
Above indicator diagram is only
for reference. Please refer to
actual product for the actual
indicator and position.
Troubleshooting
E6/E8
It can be eliminated after restarting the unit. If not, please
contact qualified professionals for service.
PL
Please contact qualified professionals for service.
The power supply voltage is too low. Please check whether
the voltage is correct.
It can be eliminated after restarting the unit. If not, please
contact qualified professionals for service.
Note: If there're other error codes, please contact qualified professionals for service.
Indoor
display
F1/F2/F3
F4
ERROR CODE
When air conditioner status is abnormal, temperature indicator on indoor unit will