Sinclair SDV4 series User Manual

FULL DC INVERTER SYSTEMS
USER MANUAL
,1',9,'8$/287'22581,76 SDV4-280-335EAA
Ă

Sinclair SDV4 series Specifications

General

Brand	Sinclair
Model	SDV4 series
Category	Air Conditioner
Language	English

Summary

Important Safety Information

Operation Range

Operation and Performance

Protection Equipment

Details protection equipment that stops the air conditioner when it runs compulsively.

About Power Cut

Explains how the system behaves and what to do when power is cut during operation.

Heating Capacity

Describes the heat-pump process and factors affecting heating capacity.

Five-Minute Protection Feature

Details a protection feature that prevents immediate reactivation after operation.

Cooling and Heating Operation

Explains how indoor units operate in cooling and heating modes simultaneously.

Features of Heating Operation

Describes the warm air delay and fan motor behavior during heating.

Defrost in Heating Operation

Explains the automatic defrosting process during heating and its effects.

Malfunction Codes of Outdoor Unit

Symptoms Not Related to Air Conditioner Troubles

System Does Not Operate

Explains why the system may not start immediately after pressing the ON/OFF button.

Fan Mode Change During Cooling

Describes automatic switch to fan mode to prevent evaporator frosting.

White Mist from Unit

Explains white mist generation in high humidity or after defrost.

Air Conditioner Noises

Details various sounds like hissing or squeaking that are normal operation noises.

Dust Emission from Unit

Explains dust emission when the unit is used for the first time after a long period.

Unit Odours

Describes how units can absorb and emit room or furniture smells.

Outdoor Unit Fan Not Spinning

Explains that the fan speed is controlled for product optimization.

Troubleshooting

Troubles and Causes of Air Conditioner

Lists common air conditioner malfunctions, their causes, and solutions.

Unit Does Not Start

Covers issues like power failure or controller problems preventing unit startup.

No Cooling Effect

Addresses issues when air flows but cooling is ineffective, e.g., temperature settings.

Frequent Unit Start/Stop

Explains causes for frequent cycling, like refrigerant issues or voltage problems.

Low Cooling Effect

Details reasons for reduced cooling, such as dirty filters or refrigerant leaks.

Low Heating Effect

Covers causes for reduced heating, like low outdoor temperature or refrigerant issues.

Remote Controller Troubles

Provides troubleshooting steps for issues related to the remote controller's functionality.

Fan Speed Unchangeable

Troubleshooting steps for when the fan speed setting is not effective.

No Remote Controller Signal

Steps to take when the remote controller buttons are unresponsive.

TEMP Indicator Off

Diagnosing why the temperature indicator on the display does not light up.

Display Disappears After Time

Addresses display issues where indicators vanish after a period.

TIMER ON Indicator Off

Explains why the TIMER ON indicator may turn off after a set time.

No Indoor Unit Response Tone

Troubleshooting no sound confirmation from the indoor unit upon button press.

Maintenance and Repair

Maintenance After Long Shutdown

Provides steps for maintaining the unit after it has been out of use for an extended period.

Maintenance Before Long Shutdown

Details procedures for preparing the unit for shutdown and storage.

About the Refrigerant

Information on refrigerant type, GWP, and handling precautions.

After-sales Service and Warranty

Information regarding warranty period and procedures for service requests.

Recommended Maintenance and Inspection

Shorter Maintenance and Replacement Cycle

Note Concerning Protection of Environment

Information Concerning Used Refrigerant Medium