Sinclair TERREL Series User Manual

Child lock function
button
Press "▲" and "▼" simultaneously to turn on or
turn off child lock function. When child lock func-
tion is on, " " icon is displayed on remote control-
ler. If you operate the remote controller, the " "
icon will blink three times without sending signal to
the unit.
When selecting " " or no display with remote con-
troller, temperature indicator on indoor unit dis-
plays set temperature.
When selecting " " with remote controller, tem-
perature indicator on indoor unit displays indoor
ambient temperature.
When selecting " " with remote controller, tem-
perature indicator on indoor unit displays outdoor
ambient temperature.
no display
●
●
●
By pressing this button, you can see indoor set
temperature, indoor ambient temperature or out-
door ambient temperature on indoor unit's display.
The setting on remote controller is selected circu-
larly as below:
●
●
●
●
NOTE
at the same time. If 8°C heating function has been set
heating function. If sleep function has been set under
Under 8°C heating function, fan speed is defaulted at
auto speed and it can't be adjusted.
Under 8°C heating function, set temperature can't be ad-
justed. Press "TURBO" button and the remote con-
troller won't send signal.
Sleep function and 8°C heating function can't operate
●
●
●
●
NOTE
heat mode, start up the 8°C heating function will cancel
sleep function.
Under °F temperature display, the remote controller will
display 46°F heating.
Outdoor temperature display is not available for some
models. At that time, indoor unit receives " " sign-
al, while it displays indoor set temperature.
It's defaulted to display set temperature when turning
on the unit. There is no display in the remote control-
ler.
Only for the models whose indoor unit has dual-8 dis-
play.
When selecting displaying of indoor or outdoor ambi-
ent temperature, indoor temperature indicator dis-
plays corresponding temperature and automatically
turn to display set temperature after three or five se-
conds.
8°C heating function
Under heat mode, press "TEMP" and "CLOCK" but-
tons simultaneously to start up or turn off 8°C heat-
ing function. When this function is started up, " "
and "8°C" will be shown on remote controller, and
the air conditioner keep the heating status at 8°C.
Press "TEMP" and "CLOCK" buttons simultane-
ously again to exit 8°C heating function.
●
●
●
NOTE
Under energy-saving function, fan speed is defaulted
at auto speed and it can't be adjusted.
Under energy-saving function, set temperature can't
be adjusted. Press "TURBO" button and the remote
controller won't send signal.
Sleep function and energy-saving function can't oper-
ate at the same time. If energy-saving function has
cancel energy-saving function. If sleep function has
been set under cool mode, start up the energy-saving
function will cancel sleep function.
combination buttons
Energy-saving function
Function introduction for
Under cooling mode, press "TEMP" and "CLOCK"
buttons simultaneously to start up or turn off ener-
gy-saving function. When energy-saving function
is started up, "SE" will be shown on remote con-
troller, and air conditioner will adjust the set tem-
perature automatically according to ex-factory
setting to reach to the best energy-saving effect.
Press "TEMP" and "CLOCK" buttons simultane-
ously again to exit energy-saving function.
been set under cool mode, press SLEEP button will
under heat mode, press SLEEP button will cancel 8°C

Sinclair TERREL Series Specifications

General

Brand	Sinclair
Model	TERREL Series
Category	Air Conditioner
Language	English