hum to be heard from the TV speaker, or bands to appear across the
screen. In this case, please use a separate USB power source capable
of supplying a minimum of 300mA, such as a mobile phone charger.
Connecting to a television SCART socket
The Vega may optionally be connected to your TV through one of it’s
SCART sockets.
To connect to this socket you require an RCA composite video to
SCART adapter. The Vega’s yellow, white and red plugs are connected
to the adapter, which is then plugged into the TV SCART socket. For
the remainder of the setup, follow from step 2 on page 2, Connecting to
a television composite video input.
Adjusting your television settings
Some modern TVs digitally filter and process the TV picture to
improve sharpness and quality. This may slightly smear the edges of the
retro graphics produced by products such as the Vega. If necessary,
please refer to your TV owners manual for instructions on how to
disable this filtering, if possible.
Switching between UK and US compatibility
By default the Vega starts in PAL television mode, common in the
United Kingdom. To use the Vega on an NTSC television, common in
the United States, press and hold button [1] while you switch on the
power to the Vega, or while you press the reset button.
3
To Next Page
Loading...
Need help?
General