Need help?Do you have a question about the Sincro EK2MCL and is the answer not in the manual?
Inspect the alternator for transport damage before initial use.
Instructions for storing the alternator in a dry, covered place during inactivity.
Ensure correct connections and clear air openings during installation.
Connect according to local regulations, including grounding.
Check for anomalies like vibrations, noises, or blocked air outlets.
Proper procedures for disposing of alternator parts at the end of their lifecycle.
Crucial warnings about touching hot surfaces and dangerous parts during operation.
Step-by-step guide for assembling the alternator unit, including safety notes.
Adjusting rotation speed for optimal voltage and frequency output.
Diagnosing and resolving issues when the generator fails to excite.
Identifying causes and solutions for insufficient voltage at no load.
Diagnosing and rectifying excessive voltage at no load.
Troubleshooting voltage drops under load conditions.
Addressing issues causing voltage fluctuations.
Causes and remedies for alternator overheating.
Troubleshooting causes of excessive noise from the machine.
How to contact Sincro service and return products for repair.
Guidelines for shipping products for warranty or repair services.
To Next Page
General
