Need help?Do you have a question about the Sinexcel PWS1-500KTL-NA and is the answer not in the manual?
General| Model | PWS1-500KTL-NA |
|---|---|
| Category | Inverter |
| Rated Power | 500 kW |
| Max. DC Input Voltage | 1500 V |
| Number of MPPTs | 12 |
| Rated AC Output Power | 500 kW |
| Nominal AC Voltage | 480 V |
| Output Voltage | 480 V |
| Frequency | 60 Hz |
| Output Frequency | 60 Hz |
| Max Efficiency | 99% |
| CEC Weighted Efficiency | 98.5% |
| Cooling Method | Smart Air Cooling |
| Protection Degree | IP65 |
| Protection Class | Class I |
| Operating Temperature Range | -30°C to +60°C |
| Humidity | 0% - 100% |
| Communication | RS485, Ethernet |
| Certifications | UL 1741, IEEE 1547 |
| Operating Temperature | -25°C to 60°C |
| Power Factor | >0.99 |
Defines the product model and its components, e.g., PWS1-500KTL-NA.
Explains safety symbols like Danger, Warning, and Attention.
Describes the energy storing power generation system composition.
Provides essential safety guidelines for installation and use.
Details important precautions for safe operation and handling.
Shows diagrams and dimensions for the PCS-AC module.
Explains the system composition, including PCS-AC modules.
Lists detailed technical specifications of the storage inverter.
Provides cabinet dimensions and diagrams for the storage inverter.
Details the front panel appearance and components of the inverter.
Guidelines for transporting and storing the storage inverter.
Procedure for removing the storage inverter from its packaging.
Steps for inspecting the unit after opening the case.
General checks to perform during open-case inspection.
Details the items included in the packing list.
Specifies environmental and site requirements for installation.
Outlines acceptable temperature, humidity, and location conditions.
Details the requirements for proper grounding of the unit.
Explains the forced air-cooling system and ventilation needs.
Defines the required space around the inverter for operation and maintenance.
Covers waterproofing and rat-proofing requirements.
Instructions for mounting and fixing the inverter cabinet.
Guides on making DC and AC electrical connections.
Specifies requirements for DC input voltage and battery configuration.
Details the 3-phase AC output connection.
Provides guidance on cable selection and wiring practices.
Recommends PE line section for grounding.
Steps for connecting the DC power source to the inverter.
Steps for connecting the AC power source to the inverter.
Defines the external wiring ports for terminal blocks.
Final checks to perform after completing the installation.
Describes the different operating states of the inverter.
Explains the automatic startup process and conditions.
Outlines procedures for starting and stopping the inverter.
Lists pre-startup checks for the device.
Details the sequential steps for starting the inverter.
Provides instructions for safely shutting down the inverter.
Describes the emergency shutdown procedure using the EPO button.
Overview of controlling the inverter via the HMI.
Describes the initial startup screen of the HMI.
Main page displaying system status, voltage, and current.
Displays system operation parameters and overview.
Allows review of alarms, operation records, and status.
Configuration options for system parameters.
Settings for system time, IP address, and communication.
Reserved page for other models' settings.
System parameter settings like boot mode and energy management.
Configuration parameters related to AC operation.
Configuration parameters related to DC operation.
Interface for debugging AC parameters.
Interface for manual startup and shutdown.
Options for controlling the inverter (manual, auto, remote).
Defines operational strategies based on time periods.
Setting operation power for different periods.
Accessing the system with login credentials.
Details the communication protocols and interfaces supported.
Describes the RS485 serial port for communication.
Explains the Ethernet port for network connectivity.
Covers communication with Battery Management Systems (BMS).
Illustrates the overall structure of the monitoring system.
Specifies the required environmental conditions for operation.
Guides on regular inspection of electrical and physical connections.
Instructions for cleaning the device and surrounding area.
Details warranty terms and free maintenance/replacement policy.
To Next Page
