Need help?Do you have a question about the Sinexcel PWD-100M and is the answer not in the manual?
Defines product models and their characteristics.
Explains hazard symbols (Danger, Warning, Caution) used throughout the manual.
Covers essential safety precautions for installation, operation, and maintenance of the equipment.
Outlines general precautions regarding personnel, equipment usage, and enclosure markings.
Describes the system topology and application of the intelligent switching equipment.
Details the technical specifications, including electrical and physical parameters of the PWD-100M.
Provides physical dimensions and front panel layouts for PWD-100M and PWD-100M-O models.
Summarizes the operational functions, including grid-connected, off-grid, and automatic switching modes.
Specifies requirements for safe transport and storage of the intelligent switching box.
Details procedures for unpacking and verifying the contents of the equipment after delivery.
Covers environmental, carrier, and other requirements for proper equipment installation.
Provides a visual flowchart outlining the step-by-step process for equipment installation.
Guides on system configuration, grounding, cable connections, and communication line setup.
Outlines the necessary verification steps to ensure correct installation and connectivity.
Describes operational states, status indications, common faults, and troubleshooting methods.
Explains how to control the device via Wi-Fi and Ethernet connections for monitoring and configuration.
Details the backstage interface for monitoring operations, event logging, and system status.
Covers procedures for pre-boot checks, grid connection, off-grid operation, shutdown, and emergency shutdown.
Explains communication protocols (Ethernet, RS485) for connecting with EMS.
Details setting up cascade networking between PWD-100M and PCS units for system integration.
Describes connecting multiple PCS units to a common network for centralized monitoring and control.
Provides guidelines for performing regular maintenance to ensure normal operation and service life.
Details procedures for checking and maintaining power circuit connections and grounding.
Describes how to monitor and check the system's operational status, key devices, and heat dissipation.
Provides instructions for cleaning and maintaining the equipment's cleanliness and ventilation.
Details the warranty policy, terms for product repair or replacement, and quality assurance.
Provides guidance on handling, storing, and returning faulty products after replacement.
Lists specific conditions, such as damage or misuse, that may void the quality assurance.
General| Model | PWD-100M |
|---|---|
| Category | Inverter |
| Rated Power | 100 kW |
| Maximum Efficiency | 98.5% |
| Output Frequency | 50/60 Hz |
| Cooling Method | Forced Air Cooling |
| Protection Level | IP20 |
| Communication Interface | RS485, Ethernet |
To Next Page