Need help?Do you have a question about the Sinexcel PWS1-500KTL-EX-M5 and is the answer not in the manual?
Provides critical safety warnings for installation and operation.
Lists detailed technical parameters for various PCS models, including electrical and physical data.
Highlights critical safety precautions for lifting and transporting the PCS.
Covers essential safety measures to prevent electrical hazards during installation.
Provides comprehensive instructions for all electrical wiring.
Specifies DC voltage range and battery system requirements for PCS input.
Emphasizes crucial safety precautions to be followed during PCS operation.
Provides a detailed sequence for powering on the PCS unit.
Guides users through the initial setup and parameter configuration prior to startup.
Covers essential general settings, including DC configuration and power dispatch.
Provides step-by-step instructions for manual PCS startup.
Explains the automatic startup process and conditions for system initiation.
Details the process for remotely starting the PCS.
Outlines the steps for safely shutting down the PCS.
Describes the procedure for completely powering off the system.
Explains the use of the emergency shutdown button (EPO).
Emphasizes safety precautions to be taken during troubleshooting.
Highlights critical safety precautions before and during maintenance activities.
Details the process for configuring various operational parameters of the PCS.
Covers configuration of DC input parameters and battery settings.
Covers overall system configurations like startup mode and energy dispatching.
Provides a step-by-step guide for manually initiating PCS startup.
Explains the automatic startup process and conditions for system initiation.
Details the procedure for starting the PCS remotely.
Outlines the steps for safely shutting down the PCS.
Describes how to cut off power and shut down the entire system.
Explains the use of the emergency shutdown button (EPO).
General| Model | PWS1-500KTL-EX-M5 |
|---|---|
| Rated Output Power | 500kW |
| Rated AC Output Power | 500kW |
| THDI | <3% |
| DC Switch | Yes |
| Number of MPPTs | 2 |
| Rated AC Output Voltage | 400 V |
| Rated AC Grid Frequency | 50 Hz / 60 Hz |
| Max. AC Output Current | 722 A |
| Surge Protection AC side | Type II |
| Operating Temperature Range | -25~60°C |
| Communication | RS485, Ethernet |
| Dimensions (W x H x D) | 1200 mm |
| Humidity Range | 0~100% |
| Certifications | CE |
| Cooling Method | Forced Air Cooling |
To Next Page
