Singer 1411 - Presser Foot Operations

RAISING
OR LOWERING
THE
PRESSER
FOOT
1. By raising
or lowering
the
presser
foot lifter,
the presser
foot
goes
up and
down
respectively.
2.
For additional
clearance,
the
foot
lifter
can
be raised
higher
to
sew
on heavy
fabrics.
REGULATING
THE PRESSER
FOOT
PRESSURE
(Patch-O-Matic)
To release
the
pressure,
push
ring
(A)
downwards.
This causes
the
regulator
to
spring
up to its
highest
position.
The
material
is
now
free
from
any pressure
of the
presser
foot.
For
sewing
thin
or
light materials,
push regulator
(8)
down
just a
little
to provide
the
light pressure
required.
If you
are sewing
thick
or
heavy materials,
push the
regulator
(B)
farther
down
to increase
the
pressure
on
the material.
presser
foot
fter
ring
(A)
reqU)ator
(B)
2