Singer 14SH744 User Manual

14SH754/14CG754/14SH764
14SH744/14CG744
(2 . 3 . 4 THREAD OVERLOCK MACHINE)
(2 . 3 . 4 THREAD OVERLOCK MACHINE WITH DIFFERENTIAL FEED)
(2 . 3 . 4 MAQUINA SOBREORILLADORA CON TRANSPORTE DIFERENCIAL)
(2 . 3 . 4 MAQUINA SOBREORILLADORA)
(SURJETEUSE 2 . 3 . 4 FILS ΕΝΤRΑΙΝΕΜΕΝΤ DIFFERNTIEL)
(SURJETEUSE 2 . 3 . 4 FILS)
Operators Guide
Manual de Instrucciones
Manuel D instructions

Singer 14SH744 Specifications

General

Brand	Singer
Model	14SH744
Category	Sewing Machine
Language	English

Summary

Important Safety Instructions

Selection of Stitches

1. Two-Thread wrapped edge Overlock

Details the 2-thread stitch for light fabrics and edge finishing.

2. Two-Thread standard rolled hem stitching

Explains the 2-thread stitch for finishing hems on light fabrics.

3. Three-thread Overlock

Details the 3-thread overlock stitch for general seaming and finishing.

4. Three-thread Flatlock

Describes the 3-thread flatlock stitch for decorative seams.

5. Three-thread Wrapped Edge Overlock

Explains the 3-thread stitch for sewing rolled hems and decorative edges.

6. Four-thread Stretch Mock Safety Stitch

Details the 4-thread stitch for stretch fabrics and safety seams.

Handy Reference Chart

Accessories

Needle Information

Principal Parts

Preparation for Threading

Setting Up the Thread Guide Holder

Guide to setting up the telescopic thread guide holder.

How to Remove and Insert Needles

To Remove Needle(s)

Steps to safely remove needles from the machine.

To Insert Needle(s)

Steps to safely insert new needles into the machine.

Threading the Machine

Understanding the Color Code

Explains thread color coding for different parts of the machine.

1) Threading the Upper Looper (Orange)

Step-by-step guide for threading the upper looper with orange coded thread.

2) Threading the Lower Looper (Yellow)

Step-by-step guide for threading the lower looper with yellow coded thread.

3) Threading the Right Needle (Green)

Step-by-step guide for threading the right needle with green coded thread.

4) Threading the Left Needle (Blue)

Step-by-step guide for threading the left needle with blue coded thread.

How to Change Threads / Tie On Method

How to Adjust the Stitch Length

How to Adjust the Seam Width

Differential Feed

Gathered Overedge

Instructions for achieving a gathered effect using differential feed.

Stretch Overedge

Instructions for using differential feed for stretch fabrics.

Standard Overedge and Rolled Hem Stitching

Suggested Tension Setting

1) 2-Thread wrapped edge overlock

Recommended tension settings for 2-thread wrapped edge overlock stitch.

2) 2-Thread standard rolled hem stitching

Recommended tension settings for 2-thread standard rolled hem stitch.

3) 3-Thread Overlock

Recommended tension settings for 3-thread overlock stitch.

4) 3-Thread Flatlock

Recommended tension settings for 3-thread flatlock stitch.

5) 3-Thread Wrapped Edge Overlock

Recommended tension settings for 3-thread wrapped edge overlock stitch.

6) 4-Thread Ultra Stretch Mock Safety Stitch

Recommended tension settings for 4-thread ultra stretch mock safety stitch.

How to Sew a Rolled Hem

Stitch Variations and Sewing Techniques

Machine Set Up

Steps for preparing the machine for stitch variations.

Flatlocking a Seam

Instructions for creating a flatlocked seam.

How to Sew an Overlock Blind Hem

Instructions for sewing an overlock blind hem.

How to Sew Pin Tucks

Guide for sewing decorative pin tucks.

Turning Square Corners

Techniques for sewing square corners.

Pin Placement

Safety guidelines for pin placement during sewing.

Securing the Thread Chain

Method for securing the thread chain at the end of a seam.

Machine Maintenance

Cleaning the Machine

Instructions for cleaning the sewing machine.

Oiling the Machine

Guide for lubricating the sewing machine's internal parts.

How to Replace the Stationary Knife

Step-by-step instructions for replacing the stationary knife.

Trouble Shooting Chart

Relationship Between Cloth, Thread and Needle

Specification