To Next PageTo Next Page
Need help?Do you have a question about the Singer 14SH764 and is the answer not in the manual?
General| Type | Overlock |
|---|---|
| Number of Threads | 4 |
| Stitch Length | 1 - 4 mm |
| Differential Feed | Yes |
| Free Arm | Yes |
| Built-in Needle Threader | No |
| Drop Feed | Yes |
| Stitch Types | Overlock, Rolled Hem |
| Stitch Options | 3-Thread, 4-Thread |
| Included Feet | Standard Foot, Gathering Foot, Blind Hem Foot |
Essential guidelines for safe operation and maintenance of the sewing machine.
Details on the 2-thread wrapped edge overlock stitch for various fabric types.
Explanation of the 3-thread overlock stitch for overedging and seaming.
Instructions for the 4-thread stretch mock safety stitch, ideal for knit fabrics.
Instructions on positioning the telescopic thread guide.
Explanation of color-coded thread paths for correct machine threading.
Step-by-step instructions for threading the upper looper with color guidance.
Step-by-step instructions for threading the lower looper with color guidance.
Detailed steps for threading the right needle using color codes.
Detailed steps for threading the left needle using color codes.
Modifying seam width by altering needle position on the machine.
Adjusting seam width using the dedicated control knob.
Application of differential feed for creating gathered effects on garments.
Application of differential feed for decorative finishes on stretch fabrics.
Tension settings for the 2-thread wrapped edge overlock stitch.
Tension settings for the 2-thread standard rolled hem stitch.
Tension settings for the 3-thread overlock stitch.
Tension settings for the 3-thread flatlock stitch.
Tension settings for the 3-thread wrapped edge overlock stitch.
Tension settings for the 4-thread ultra stretch mock safety stitch.
Preparation steps for performing a rolled hem stitch.
Guide to creating decorative flatlock seams using specific machine settings.
Instructions for sewing an overlock blind hem for a clean finish.
Techniques for creating decorative pin tucks on fabric.
Methods for reinforcing seams using tape for added durability.
Creating decorative braids using the chaining off function.
Steps for cleaning lint and debris from the sewing machine's looper and knife areas.
Guidance on lubricating critical moving parts of the sewing machine.
Instructions for replacing the stationary cutting knife.
