Lower looper thread
Needle thread
Underside
Upper looper thread
Topside
Needle thread
58
A flatlock stitch is achieved by adjusting the tension
of the 2-thread or 3-thread overlock stitch, sewing the seam,
and then pulling the fabric apart to flatten the seam.
The flatlock stitch can be used as a construction and
decorative stitch or for ornamentation only.
Use either overedge right needle or overedge left needle.
Begin with the machine threaded and tension ATD-E
balanced for the 2-thread overedge (page 42) or
3-thread flatlock stitch ATD-F (page 44).
Place the fabric wrong sides together to sew a decorative
stitch on the right side of the garment.
Sew the seam, trimming the excess fabric.
The needle thread (orange or blue) will formaVonthe
underside of the fabric.
The lower looper thread will pull into a straight line at the
fabric edge.
Pull on opposite sides of the seam to pull the stitches flat.
How to Sew a Flatlock Decorative Seam
1) Machine Set Up
2) Flatlocking a Seam
25. STITCH VARIATIONS AND
SEWING TECHNIQUES
To Next Page
Loading...
