Singer 1507 - Trim Attachment Stitch Function

Trim attachment stitch function
37
0
1
2
3
4
- Set the stitch pattern dial to zigzag.
- Set the stitch length to "0".
- Sew 6 to 8 stitches to secure the trim in place.
- Then set needle to right needle position and then to sew the
length of the trim.
- Set stitch pattern dial to straight stitch.
- Sew 2 to 3 stitches to tie off.
- This function is used to attach trim or ribbon to a sewing
project.