Singer 191D-20 - Needle Attachment

3.7
Needle
Attachment
Caution
Choose a proper
needle size
according to the
count
of thread and
the type
of sewing
material used.
The power supply
should be
cut off
before attaching
the needle.
Turn
the hand wheel until the nee-
dle bar reaches the highest point
of its stroke (Figure 12).
L oosen screw '2' and hold needle
'1' with its indented part 'A' facing
exactly to the right in direction '8 '.
Insert the needle in the direction
of the arrow until it will go no fur-
ther .
Tighten
the screw '2 '.
Make sure the long groove 'C' of
the needle is facing exactly to the
left in direction 'D '.
t
Fi gure 12
High Sp eed Straight Lock sti tch Se wi ng Machine ! Instruct ion M an ual an d Pa rt s List 10
From the library of: Superior Sewing Machine & Supply LLC