Need help?Do you have a question about the Singer 20U-109 and is the answer not in the manual?
General| Type | Industrial Sewing Machine |
|---|---|
| Stitch Type | Straight, Zigzag |
| Max Stitch Length | 5 mm |
| Operation | Manual |
| Maximum Stitch Width | 9 mm |
| Free Arm | No |
| Motor | Clutch Motor |
| Buttonhole Styles | 4-step buttonhole |
| Needle Positions | Left, center, right |
| Presser Feet | buttonhole |
| Bobbin | Class 15 |
| Included Accessories | Bobbins, Needles, Screwdrivers |
| Dimensions | Varies with table |
Basic safety procedures must be followed before and during machine operation.
Guidelines to prevent electrical shock, injuries, and accidents during machine use.
Detailed technical specifications including speed, stitch size, and dimensions.
Guidance on lubricating critical parts of the sewing machine for smooth operation.
Selection guidelines for proper needles and threads based on material.
Detailed steps for correctly inserting the needle into the needle bar.
Instructions on how to properly wind thread onto the bobbin.
Step-by-step guide for threading the bobbin case correctly.
Comprehensive guide for threading the sewing machine correctly.
How to adjust the stitch length using the feed regulating dial and reverse lever.
Procedure for adjusting the pressure exerted by the presser foot.
How to regulate the tension of the needle thread using the knob.
Adjusting the tension of the bobbin thread using the regulating screw.
Detailed procedure to set and regulate the zigzag stitch width.
Periodic checks of safety devices, screws, v-belt, and electrical components.
To Next Page
