Singer 2282 - Reverse Sewing and Work Removal; Performing Reverse Sewing; Removing Fabric from Machine; Cutting the Thread

Turn the handwheel toward you (counterclockwise) to bring
the thread take up lever to its highest position, raise the
presser foot and remove work behind the needle and presser
foot. (2)
Pull the threads under and behind the presser foot. Guide the
threads to the side of the face plate and into thread cutter (B).
Pull threads down to cut. (3)
To secure the beginning and the end of a seam, press down
the reverse sewing lever (A). Sew a few reverse stitches.
Release the lever and the machine will sew forward again. (1)
1
3
2
A
P
U
S
H
B
EN
Removing the Work
Cutting the Thread
Reverse Sewing
29