60
GB
Multi-stitch zig-zag
Sewing on lace and elastic, darning, mending, reinforcing
edges.
Set the stitch pattern dial to " ".
Place patch in position. The stitch length can be shortened
to produce very close stitches. (1)
When mending tears, it is advisable to use a piece of
backing fabric to reinforce. The stitch density can be varied
by adjusting the stitch length. First sew over the center and
then overlap on both sides. Depending on the type of fabric
and damage, sew between 3 and 5 rows. (2)
Set machine as illustrated on left.
1
2
To Next Page
Loading...
