12
The diagram on this page display the stitch patterns available
on the machine.
Stitches in the top of the diagram are indicated on the Pattern
Selector Dial in gray. To select the patterns indicated with the
gray color, turn the Pattern Selector Dial. (d)
Use the Stitch Length Dial (c) to adjust the stitch length as
desired for the project. Use the Stitch Width (b) to adjust the
width of the stitch as desired.
To obtain the other patterns, turn the stitch length dial to “S1”
or “S2” and select the pattern desired with pattern selector
dial.
The Pattern Selector Dial may be turned in either direction.
a. Reverse Sewing Lever
b. Stitch Width Dial
c. Stitch Length Dial
d. Pattern Selector Dial
How to Choose Your Pattern
To Next Page
Loading...
