Singer 650 - Using the Seam Guide; Straight Seams with Seam Guide; Curved Seams with Seam Guide

The
seam guide aids
in attaining uniformity
of seam
width
when extra
control is needed.
It provides
for stitching to be
spaced at any distance
between
V. to 1/4 inches (3
- 30 rmin
from the edge
of the fabric. It
is secured to the
bed of the ma-
chine
in either of the
threaded holes
to the right of
the slide
Plate.
Applications:
Seams, blindstitdiing,
straight
stitching and
decorative stitching.
Straight Seams
fhbri s
Place pins with points toward seam
edges so
they nip
into fabric
at stitching
line.
Stitch Pattern Selectors* AX
The hugcer] stratigh-t-sb
Ict presser toot wjil
SUtldWrdth
Selector:
3
ride, hfely
over the pin
points Guide
fabric
Stitch
Length:
1-4
mm
depending
on
edues
lightly
against
guide
while
stitching.
fabric
Straight SUkt Throat
Plate and
Presser Foot,
or
General
Purpose Throat
Plate and
Presser Foot
Seam Guide
Curved
Seams
Curv
ed vanam requidre
additionalI
treatmentri
To
guide
seam
stit
din
t straight
and
parallel
in
handling.
to the edge
of the fabric,
adjust and align
A shorter
stitch will provide
greater elasti-
the seam guide
for proper seam
width,
(ity and strength.
Pin seam
edges and
basle if necessary.
Hand Set
the sWant uide
at an angle so
that the
basting
can be eliminated
on easy-to-handle
end
closest to the needle
acts as a guide.
60
i
60