EasyManua.ls Logo

Singer 601 User Manual

Singer 601
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Other manuals for Singer 601

Question and Answer IconNeed help?

Do you have a question about the Singer 601 and is the answer not in the manual?

Singer 601 Specifications

General IconGeneral
TypeMechanical
Model601
Feed MechanismDrop Feed
Bobbin TypeClass 15
Voltage110V
Stitch OptionsDecorative
Presser FeetAll-Purpose, Zipper, Buttonhole
Warranty25 Years

Summary

Operator's Guide for SINGER 591/601 Machines

Introduction to SINGER 591/601 Machines

Introduces the new SINGER sewing machine models 591 and 601.

Machine Oiling Procedures

Details on how to oil the sewing machine, including oil type and level checks.

Adjusting Rotating Hook Oil Flow

Instructions for adjusting oil flow to the rotating hook for optimal lubrication.

Needle Selection and Insertion

Guidance on selecting SINGER needles and how to insert them correctly.

Thread Handling and Bobbin Winding

Thread Identification and Selection

Information on thread types and how to determine thread twist for sewing.

Machine Threading Procedure

Detailed steps for threading the sewing machine needle.

Threading the Thread Unwinder

Instructions for threading the bobbin winder mechanism.

Bobbin Winding Process

Guide on how to wind a bobbin using built-in or table top winders.

Bobbin Case Operations and Thread Tensions

Removing Bobbin Case and Bobbin

Steps for removing the bobbin case and bobbin from the machine.

Threading the Bobbin Case

Instructions on how to correctly thread the bobbin case.

Replacing the Bobbin Case

Steps for properly reinserting the bobbin case into the machine.

Setting and Adjusting Thread Tensions

Guidance on achieving balanced needle and bobbin thread tensions for perfect stitches.

Sewing Operation and Adjustments

Preparation and Basic Sewing

Steps to prepare the machine and material before starting sewing operations.

Adjusting Stitch Length

How to set the stitch length using the regulating dial.

Adjusting Presser Foot Pressure

How to adjust the presser foot pressure for proper material feeding.

Adjusting the Thread Guard

How to adjust the thread guard for different material types and stitch lengths.

Machines with U.T.T., Wiper and Back Tack

Cords and Connections Setup

Instructions for connecting motor, sensor, and solenoid cords.

Sewing Speed Specifications

Table showing sewing speed relation to motor pulley size and frequency.

Foot Treadle Operation

Four steps explaining how to operate the foot treadle for speed control.

Using the Soft Start Switch

How to use the soft start feature for precise thread control.

Trimmer Adjustments and Thread Control

Adjusting the Trimmer Knife

How to adjust the trimmer for optimal cutting quality.

Sharpening the Stationary Knife

Instructions on how to sharpen the stationary knife.

Adjusting Thread Tensions

Details on adjusting thread tensions, including special springs.

Adjusting Needle Thread End Length

Adjusting the needle thread length using the slack thread regulator.

Advanced Features and Machine Care

Using the Push Button Back Tack

How to use the push button for back tacking operations.

Using the Wiper Feature

How to use the wiper for specific sewing tasks.

Machine Care and Maintenance

General advice on cleaning and lubricating the sewing machine.

Tips for Perfect Operation

Tips for optimal performance and care of the sewing machine.

Machine Specifications

Specifications for Regular Machines

Technical specifications for various regular SINGER 591/601 machine models.

Specifications for U.T.T., Wiper, Back Tack Machines

Technical specifications for models with U.T.T., Wiper, and Back Tack features.

Related product manuals