Singer 6699 - PICKING UP BOBBIN THREAD; Picking Up Bobbin Thread Procedure

20
NOTE: A quick way to pick up the bobbin thread
is, with straight stitch selected, touch and release
the reverse switch.Your machine will perform one
down-up cycle and stop with the needle up. Always
stopping with the needle “fully up” is one of the
features of your computer sewing machine.
PICKING UP BOBBIN THREAD
1. Raise the presser foot lifter.
ǽǾǶǺdzȅǮǻǶdzȅȠȜȏȩȏȩȟȠȞȜȝȜȒțȭȠȪȦȝȡșȪțȡȬțȖȠȪ
ȐȩȏȓȞȖȠȓȝȞȭȚȡȬȟȠȞȜȥȘȡȖțȎȔȚȖȠȓȖȜȠȝȡȟȠȖȠȓ
ȘțȜȝȘȡȦȖȠȪȭȐȜȏȞȎȠțȜȚțȎȝȞȎȐșȓțȖȖǰȎȦȎȚȎȦȖțȎ
ȐȩȝȜșțȖȠȜȒȖțȤȖȘșȐțȖȕȐȐȓȞȣȖȜȟȠȎțȜȐȖȠȟȭȟ
ȝȜȒțȭȠȜȗȖȑșȜȗǰȟȓȑȒȎȜȟȠȎțȎȐșȖȐȎȠȪȟȭȟȖȑșȜȗȐ
ȘȞȎȗțȓȚȐȓȞȣțȓȚȝȜșȜȔȓțȖȖ²ȜȒțȎȖȕȜȟȜȏȓțțȜȟȠȓȗ
ǰȎȦȓȗȘȜȚȝȪȬȠȓȞțȜȗȦȐȓȗțȜȗȚȎȦȖțȩ
1270DVXUDLSOL÷LQLWXWPDQÕQNROD\ELU\ROXG]GLNLú
VHoLOPLúNHQJHULGLNLúG÷PHVLQHEDVÕSEÕUDNPDGÕU
0DNLQHQL]ELUDúD÷Õ\XNDUÕLúOHP\DSDFDNYHL÷QH\XNDUÕ
NRQXPGDGXUDFDNWÕUø÷QHQLQ³WDP\XNDUÕ´SR]LV\RQXQGD
GXUPDVÕELOJLVD\DUOÕGLNLúPDNLQHQL]LQ|]HOOLNOHULQGHQ
ELULVLGLU
ǽǼDzȈdzǺǻǶǴǻdzǷǻǶȀǶ
0$685$ø3/øöø1ø17878/0$6,
ǽȓȞȓȐȓȒȖȠȓȞȩȥȎȑȝȞȖȔȖȚțȜȗșȎȝȘȖȐȘȞȎȗțȓȓ
ȐȓȞȣțȓȓȝȜșȜȔȓțȖȓ
ǽȞȖȒȓȞȔȖȐȎȭȘȜțȓȤțȖȠȖșȓȐȜȗȞȡȘȜȗȝȜȐȓȞțȖȠȓ
ȚȎȣȜȐȖȘțȎȟȓȏȭȝȞȜȠȖȐȥȎȟȜȐȜȗȟȠȞȓșȘȖȟțȎȥȎșȎ
ȜȝȡȟȠȖȐȎȕȎȠȓȚȝȜȒțȭȐȖȑșȡȐȘȞȎȗțȓȓȐȓȞȣțȓȓ
ȝȜșȜȔȓțȖȓ
%DVNÕD\D÷ÕNDOGÕUPDNROXQXNDOGÕUÕQ
ø÷QHLSOL÷LQLJHYúHNELUúHNLOGHVROHOLQL]OHWXWDUNHQYRODQÕVD÷
HOLQL]OHNHQGLQL]HGR÷UXVDDWLQWHUVL\|QQGHoHYLUHUHNLON
|QFHL÷QH\LLQGLULQDUGÕQGDQGDHQ\NVHNNRQXPDNDONÕQFD\D
NDGDULúOHPHGHYDPHGLQ
2. Holding needle thread loosely with your left hand, turn
hand wheel toward you (counter-clockwise) with your right
hand, first lowering the needle and continuing until the
needle comes to its highest position.
3. Lightly pull up the top thread, and pick up bobbin thread,
which will appear through the needle plate slot.
ǿșȓȑȘȎȝȜȠȭțȖȠȓȕȎȐȓȞȣțȬȬțȖȠȪȖȐȩȠȭțȖȠȓțȖȔțȬȬțȖȠȪ
ȘȜȠȜȞȎȭȝȜȭȐȖȠȟȭȥȓȞȓȕȜȠȐȓȞȟȠȖȓȐȖȑȜșȪțȜȗȝșȎȟȠȖțȓ
ǽȞȜȐȓȒȖȠȓȜȏȓ țȖȠȖ țȎȕȎȒȝȜȒȝȞȖȔȖȚțȜȗșȎȝȘȜȗ
ȜȟȠȎȐȖȐȜȘȜșȜȟȚ
hVWLSOL÷LQLKDILIoH\XNDUÕoHNLQYHL÷QHSODNDVÕGHOL÷LQGHQ
J|UQHFHNRODQPDVXUDLSOL÷LQLWXWXQ
hVWYHPDVXUDLSOLNOHULQLELUOLNWHPDNLQHQLQDUNDWDUDIÕQDGR÷UX
EDVNÕD\D÷ÕQÕQDOWÕQDoHNLQYHFPNDGDUSD\EÕUDNÕQ
4. Pull both top and bobbin threads together toward the back
of the machine under the presser foot, leaving about 6”
(15 cm) clear.
1
2
3
4