Singer 6699 - CHANGING THE PRESSER FOOT; Presser Foot Replacement Procedure

29
Foot release lever
Presser foot lifter
ǾȩȥȎȑȝȜȒȨȓȚȎȝȞȖȔȖȚțȜȗșȎȝȘȖ
%DVNÕD\D÷ÕNDOGÕUPDNROX
$\DND\ÕUPDNROX
ǾȩȥȎȑȟȠȜȗȘȖșȎȝȘȖ
3
1
2
Foot holder
DzȓȞȔȎȠȓșȪșȎȝȘȖ
$\DNWXWXFXVX
ǻȎȔȚȖȠȓțȎȞȩȥȎȑȟȠȜȗȘȖșȎȝȘȖȥȠȜȏȩȟțȭȠȪ
șȎȝȘȡ
ǽȜȚȓȟȠȖȠȓțȡȔțȡȬșȎȝȘȡțȎȖȑȜșȪțȡȬȝșȎȟȠȖțȡ
ȠȎȘȥȠȜȏȩȝȎȕșȎȝȘȖȞȎȟȝȜșȎȑȎșȟȭȠȜȥțȜȝȜȒ
ȒȓȞȔȎȠȓșȓȚșȎȝȘȖ
ǼȝȡȟȠȖȠȓȞȩȥȎȑȝȜȒȨȓȚȎȝȞȖȔȖȚțȜȗșȎȝȘȖȖ
șȎȝȘȎȟȤȓȝȖȠȟȭȟȒȓȞȔȎȠȓșȓȚ
CHANGING PRESSER FOOT
Be sure needle is in the up position.
Raise presser foot lifter.
1. Push presser foot release lever to remove the foot.
2. Place the desired foot on the needle plate aligning the
presser foot pin with the foot holder.
3. Lower the presser foot lifter so that the foot holder
snaps on the foot.
ǵǮǺdzǻǮǽǾǶǴǶǺǻǼǷǹǮǽǸǶ
%$6.,$<$ö,1,1'(öøù7ø5ø/0(6ø
ȁȏȓȒȖȠȓȟȪȥȠȜȖȑșȎțȎȣȜȒȖȠȟȭȐȘȞȎȗțȓȚȐȓȞȣțȓȚ
ȝȜșȜȔȓțȖȖǽȓȞȓȐȓȒȖȠȓ ȞȩȥȎȑȝȜȒȨȓȚȎ ȝȞȖȔȖȚțȜȗ
șȎȝȘȖȐȐȓȞȣțȓȓȝȜșȜȔȓțȖȓ
$\D÷ÕoÕNDUPDNLoLQEDVNÕD\D÷ÕD\ÕUPDNROXQDEDVÕQ
øVWHGL÷LQL]D\D÷ÕL÷QHSODNDVÕ]HULQH\HUOHúWLULQYHEDVNÕ
D\D÷ÕSLPLQLD\DNWXWXFXVXLOHKL]DOD\ÕQ
$\DNWXWXFXVXQXQD\DN]HULQHRWXUPDVÕLoLQEDVNÕD\D÷ÕNDOGÕUPD
NROXQXLQGLULQ
ø÷QHQLQ\XNDUÕNRQXPGDROGX÷XQGDQHPLQROXQ
%DVNÕD\D÷ÕNDOGÕUPDNROXQX\XNDUÕNDOGÕUÕQ