Singer 7258 - Picking Up Bobbin Thread

24
1
2
3
4
PICKING UP BOBBIN THREAD
1. Raise the presser foot lifter.
2. Holding needle thread loosely with your left hand, turn
hand wheel toward you (counter-clockwise) with your right
hand, first lowering the needle and continuing until the
needle comes to its highest position.
3. Lightly pull up the top thread, and pick up bobbin thread,
which will appear through the needle plate slot.
4. Pull both top and bobbin threads together toward the back
of the machine under the presser foot, leaving about 6”
(15 cm) clear.
NOTE: A quick way to pick up the bobbin thread is,
with straight stitch selected, touch and release the
reverse switch.
Your machine will perform one down-up cycle and
stop with the needle up. Always stopping with
the needle “fully up” is one of the features of your
computer sewing machine.