EasyManua.ls Logo

Singer 7640 - Getting Ready to Sew; Powering Your Machine

Singer 7640
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GETTING READY TO SEW
Powering Your Machine
2
2
12
Connect the machine to a power source as illustrated. This machine is equipped with a polarized plug
which must be used with the appropriate polarized outlet. (a and b)
Unplug power cord when machine is not in use.
Foot Control
The foot control regulates the sewing speed. When foot control is disconnected, use the Start/Stop
Button to operate the machine.
Sewing Light
Press main switch from OFF(o) to ON (-) for power and light.
For machine with a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to ¿t in a polarized outlet only one way
. If it does not ¿
t fully in the
outlet, reverse the plug. If it still does not ¿t, contact a quali¿ed electrician to install the proper outlet.
Do not modify the plug in any way
.
Your SINGER
®
machine is adjusted to provide the best stitch results at normal room temperature.
Extreme hot and cold temperatures can affect the sewing results.
After switching off, residual power may still remain in the machine. This may cause the light to
stay on for a few seconds while the power is consumed.
This is normal behavior for an energy ef¿
cient
appliance.

Table of Contents

Related product manuals