Table of Contents Previous Page | Next Page
25
82387 No. 66
QUILTER
Remove the presser foot and attach the quil-
ter foot in its place. The quilter guide can be
used on either the right or left side of the nee-
dle and the distance of the guide from the
needle determines the width of space
between the rows of stitching. Slide the wire
of the guide into the holder prepared for it on
the foot and set it to the width desired.
Let the quilter guide follow the edge of the
goods, a straight crease, or a chalk line, as
the case may be, for the first row of stitching.
All succeeding rows are made straight and at
a uniform distance by keeping the last row
steadily under the guide.
FIG. 33
To Next Page
Loading...
