DESCRIPTION
Machines of
Class
262 are high speed, drop feed,
chain stitch machines designed for general stitching
operations on fabrics ranging
from
light to heavyweight.
Available for single, double or three needle opera
tions
such
as binding, goring, hemming, lap seam fell
ing, sleeve setting, yoking and plain stitching, these
machines
perform
outstanding work on trousers, shirts,
jackets, children's wear and
plastics.
General
Charocteristics
Three plain super finished bearings support the
arm
shaft.
High
speed
(see
page 4)
.Maximum
speed dependent
upon nature of work and ability of operator.
Automatic lubricating system with oil flow window
in direct view of operator delivers oil to ail principal
bearings.
Machine
fitted
with
attachment
slide
to
reduce
effort
and time required to change attachments.
Machine arm provided with seat for independent
light fixture mounting.
Looper thread
tension
releaser
supplied if
specified
on the order,
at
additional charge.
Knee lifter integral with machine base and reservoir.
Foot lifter supplied in place of knee lifter if speci
fied
on
the
order.
Special
Features
of Machine
Varieties
Mochine
262-1:
For light and medium weight
fabrics.
One needle and one looper.
Stitch length, 6 to 22 to the Inch.
Needle bar stroke, 1
-1/16
inches.
Clearance under presser
foot,1/4
inch (Low Lift).
Machine
262-2
For medium
and
medium-heavy
weight
fabrics.
One
needle
and
one
looper.
Stitch length,6 to 22 to the inch.
Needle
bar stroke,1
-3/16
inches.
Clearance under presser foot,5/16 inch
(Medium
Lift),
Machine
262-3:
For medium-heavy and heavy
weight
fabrics.
One needle and one looper.
Stitch length, 5 to 22 to
the
inch.
Needle
bar
stroke,
1
-5/16
inches.
Clearance under presser foot,3/8 inch
(High
lift).
Machine
262-20:
Similar to Machine 262-2
except:
Two
needles
and two
loopers
Gauges:
3/32
inch to
1/2
inch in
steps
of 1/32 inch.
Close
coupled feed roll to
aid
in
correct
feeding
of
material.
Machine
262-21:
Similar to Machine 262-1
except:
Two
needles
and two loopers.
Gauges:
3/32
inch to
1/2
inch in
steps
of
1/32
inch.
Machine
262-22:
Similar to
Machine
262-2 except: \
Two
needles
and
two
loopers.
|
Gauges;
3/32
inch
to
1/2
inch
in
steps
of
1/32
inchy
Machine
262-23:
For
seat
seaming
medium
and medium-heovy weight
trousers.
Two
needles
and two loopers.
Machine
will only be supplied with needles set
tandem
3/16
inch
apart.
Looper throw-out
device.
Stitch length, 6 to 20 to the inch.
Needle
bar
stroke,
1
-5/16
inches.
Clearance under presser foot,
3/8
inch (High Lift),
Machine
262-24:
Similar to
Machine
262-23
except:
Machine
will only be supplied with needles
set
diagonally
1/32
inch apart.
Machine
262-25:
Similar
to
Machine 262-2
except:
Two
needles
and two
loopers.
Gauges: 3/32 inch to 1/2 inch in steps of 1/32 Inch.
Needle bar
stroke,!-5/16"
Machine
262-31:
For sewing medium-heavy and heavy weight
fabrics.
Three
needles
and
three
loopers.
Gauges: 3/32 inch to
3/16
inch betweeneach needle,
Looper throw-out
device.
Stitch length, 5 to 22 to the inch.
Needle
bar
stroke,
1
-5/16
inches.
Clearance under presser foot,
3/8
inch (High Lift).
Machine
262-32:
Similar to
Machine
262-31
except:
Close
coupled feed roll to aid in
correct
feeding
of
material.
Needle
bar
stroke,
1
-7/16
inches.
Foot lifter supplied in place of knee lifter.
To Next Page
Loading...
