Presser Foot Lifter
The presser foot lifter raises and lowers the
presser foot.
You can raise it higher than the normal up position
to more easily place fabric under the foot.
Remember to lower the presser foot onto the fabric
before starting to sew.
1 Presser foot lifter
2 Normal up position
3 Highest position
Reverse Stitch Control
Press and hold the Reverse Stitch Lever to sew in
reverse.
4
Finger Guard
Your machine is now fitted with a Finger Guard.
This is designed to help protect your fingers from
coming in contact with the needle.
To remove, loosen the setscrew and remove the
finger guard. Make sure the presser foot and its
holder are in the correct position, then tighten the
setscrew with a screwdriver.
To Next Page
Loading...
