Singer M1505 - Changing the Presser Foot

20
Removing the presser foot
Push the presser foot (e) to disengage from the cut-out (c). (1)
Attaching the presser foot
Install the pin (d) of the presser foot (e) into the cut-out (c) of
the presser foot holder. (2)
Removing and attaching the presser foot shank
Raise the presser bar (a) with the presser foot lifter.
Remove and attach the presser foot shank (b) as illustrated.
(3)
Attention:
Turn power switch to o󰀨 (“O”) when carrying out any of the
above operations!
Changing the Presser Foot
e
c
b
a
c
d
e
b
a