Embroidery – 49
The Bobbin Thread Is Running Low
When the bobbin thread is running low, a pop-up message
appears giving you notice that you will soon need to change the
bobbin. This gives you an opportunity to plan when you want
to change your bobbin.
Sound
When active, the signal for some warning alerts or attention
pop-up messages will be repeated in intervals until the pop-up
is closed.
Attention!
If the machine stops and this pop-up appears on the screen you
need to stop sewing. Wait a moment and touch the conrm
button when it is enabled. Check the needle size and condition.
Check for correct threading.
Embroidery Edit Pop-up Messages
Too many designs selected. Please remove
a design and try again.
This pop-up appears for one of the following rea-
sons:
• The design combination contains too many color blocks.
• There are too many designs in the combination.
• The design combination you are trying to make contains too
many stitches.
To Next Page
Loading...
Need help?
General
