NARROW AND ROLLED HEM, PICOT STITCH
Narrow (A) and rolled edge (B) is ideal for use on thin materials such as georgette crepe, crepe
de chine, silk etc.
Picot stitch (C) can be used when sewing on fine "scarflike" material. In view of the nature of
these hems, they are unsuitable for use on "hard or heavy" materials.
1, Raise the presser foot.
2. Open the front cover and working table.
3. Remove the stitch finger (1) from the needle plate with the screw driver (2) (Fig. 1). Store it in
the front cover or accessory bag.
4. Set the machine according to the setting chart on page 17.
NOTE:
1. Use the following recommended thread.
2. After finishing, reinstall the stitch finger firmly between the spring and needle plate as
illustrated (Fig. 2).
Fig. 1
Thread for needle
Upper looper
Lower looper
Narrow overlock edge
with Three Threads
Polyester, Nylon, Silk No. 50-100
Polyester, Nylon, Silk No. 50-100
Bulk nylon (less stretchable)
Rolled edge
with Three Threads
Nylon No. 100
Bulk nylon (less stretchable)
Fig. 2
A
B
C
20
To Next Page
Loading...
