Singer SRP-50 - P Carriage Operation; P Carriage Usage

0
c
P CARRIAGE
In drive lace knitting, use P Carriage "A" without P Presser
"B".
In pile knitting, use P Carriage "A" with P Presser "B"
attached.
Place P Presser "B" underneath Arm "C" and secure with
fastening screw "D".
WITHOUT P PRESSER
Place P Carriage straight onto Knitter or Ribber Needle Bed
ensuring rail guide "A" fits correctly on rail "B".
WITH P PRESSER ATTACHED
Place P Presser "A" first over Sinker Posts "B" thereafter
place rail guide "C" onto rail "D" .
On Knitter always start from the right side.
® Move P Carriage once (right-left).
Stitches will be behind latches and needles are aligned
in C position.
@ Move P Carriage twice (right-left-right).
Stitches have slipped off needles.
On Ribber always start from the left side.
® Move P Carriage once (left-right).
Stitches will be behind latches and needles are aligned
in ·c position.
@ Move P Carriage twice (left-right-left).
Stitches have slipped off needles .
- 11 -