Singer SRP-50 - Page 47

No . 8 ( R- 2) -A
No . 9 (R-2) -A
You can use Punch Cards below in PILE RIB .
No. 10 (R-2) -A
The photograph opposite shows the fabric of Pile Rib
knitted without using Punch Card.
FINISHED FABRIC CAN BE USED WITH CLOSED PILE
LOOPS OR CUT LOOPS.
To cut loops, spread fabric on a flat surface.
Insert one scissor blade into centre of loops and cut open.
Give steam to the surface of the fabric.
DO NOT PRESS.
-43-