REPLACING THE BOBBIN
When purchasing a replacement Singer
®
bobbin for this appliance, keep in
mind that your appliance uses a Class 15 metal bobbin.
Replacing the Batteries (4AA Batteries - Not supplied with the product)
Note: Before replacing the baeries, make sure that the appliance is O.
AC/DC ADAPTER (NOT SUPPLIED WITH THE APPLIANCE)
Adapter should be of 6V 800mA. A plug with a diameter of 1/8"
(3.175mm) should be used with the adapter. Plugging the adapter
to a socket with different values may cause damage to the socket or
the adapter. Make sure that you adjust the end polarity of the adapter
according to the diagram at the bottom of the DC input jack of the
sewing machine.
ATTENTION: The needle is sharp. Be very careful when working with
the needle to avoid the risk of injury. Keep it away from children.
When not in use, the appliance should always be Off.
To Next Page
Loading...
