Singer Stitch Sew Quick - Using Your Stitch Sew Quick Handheld Mending Machine; Parts Diagram; Before First Use; Instructions for Use

When using the device for the rst time, run it for 10
seconds and then wait for 5 seconds. Then you can
use it continuously.
Lift the xing plate and pull out the test material.
Cut the thread close to the test material.
a ]
BEFORE FIRST USE:
INSTRUCTIONS FOR USE:
Figure #1
Figure #2
Figure #3
Using Your Stitch Sew Quick Handheld Mending Machine
Note: Always use the rotang dial to move the needle. To avoid damaging the inner mechanism,
never directly press on or pull the needle arm.
PARTS DIAGRAM
Make sure that the appliance is in Off position.
(See Figure #1. The On/O buon should be slid
towards the back of the appliance). Turn the rotating
dial to set the needle arm to the highest position.
Note: The rotating dial can be turned to either
direction. (See Figure #1)
b ]
1 ]