Make sure the BLUTOOTH indicator on the front
of the Singsation Classic is blinking rapidly.
(If it isn’t, give a short double-press on the
BLUETOOTH button. The Singsation Classic
announces “Pairing.”)
Front
If you’ve previously paired your phone or other Bluetooth device with
the Singsation Classic, it will automatically attempt to reconnect to
that device when you switch it on. If you want to pair to a new device,
give a short double-press to the BLUETOOTH button. The Singsation
Classic announces “Pairing” and the BLUETOOTH indicator starts
blinking.
Choose Singsation Classic from the pairing
options on your Bluetooth device. (If it’s not
in the list, choose “Scan” from your device’s
Bluetooth menu.)
The Singsation Classic announces “Device Connected” when it’s finished
pairing and connecting to your Bluetooth device. The BLUETOOTH
indicator turns solid blue.
Note: The process of enabling Bluetooth and connecting varies from device to device. See your device’s owners
manual for more information and specific instructions.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• Make sure there’s nothing plugged into the Singsation Classic’s AUX IN jack when
you’re trying to use Bluetooth.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters).
This range may vary, however, based on other factors, such as room layout, wall
material, obstacles, your device’s Bluetooth performance, etc. If you’re having problems
connecting to the speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.
To Next Page
Loading...
