9
TROUBLESHOOTING
Problem
Possible Cause(s)
Solution(s)
No output is being
transmitted.
The input selector (DVD/AUX/HDD)
is set to the wrong position .
The output jacks of the KA-2500DSP may
not have proper cable connected.
Faulty connection within extemal
commponents or eternal component
failure.
The power cord to the KA-2500DSP is not
plugged in .
Switch source button to the
correct source channel.
Make sure the cables to the
correct source channel.
Make sure the cables from the
output jacks on the IP-8988G2
are connected to the input jacks
on external equipment.
Checks overall cabling and
viability of external equipment.
Plug the power cord from the
KA-2500DSPto a wall outlet.
Unable to connect
the KA-2500DSP
to my television
monitor with the RCA
cable provided.
Your TV does not have RCA style A/V
input jacks.
Use an external RF Tmodulator.
There is a lound
"squealing" noise
coming from the
speaker.
Microphone is too close to the
speakers.
Microphone volume is too high.
Too much treble being used.
Increase space between microphone
and speakers
Turn down microphone volume
Lower the treble levels
GLOSSARY OF TERMS
Digital Echo: Digital echo is a synthrtically processed sound effect that mimics natural
echo.Echo in general is the "bouncing" of waves back and forth between 2
surfaces,This effect gives a spacious or ambient feeling that works great
with vocals.
Repeat: Repeat is facet of the echo proces,Repeat refers to the frequency of echoes
within a period of time.
Delay: Delay is also a facet of the echo process. Delay refers to the amount of time
that exists between echoes.
VCD: VCD is a disc formatted in MPEG-1 , These discs are good candidates for
Karaoke use as they have an audio and a video layer to them. VCD stands for
Video Compact Disc.
A/V: A/V is an abbreviation for Audio/Visual.
RF Modulator: This is an adapter device used to connect the video output to audio/video
equipment to TV'S that do not have compatible RCA style A/V jacks
To Next Page
Loading...
Need help?
General
