39
Technical Support
BeatBuddy Manual
If you notice anything strange with your BeatBuddy, first make sure all the
cables are firmly connected.
Then, power the pedal off by disconnecting for a minute, then plug it back in.
If that doesn’t work, the files on the SD card may have been corrupted (this
happens on rare occasions), and you should delete all of the files from the SD card
and reload your saved Project with the BeatBuddy Manager or the SD Card backup
files which have the Default Content that came with your BeatBuddy.
The SD Card backup files and the BeatBuddy Manager Software is available at
https://singularsound.com/contact/
If you’re having trouble fixing any problems with your BeatBuddy, please email us at
support@singularsound.com.
To Next Page
Loading...
