Sioux Tools 645 User Manual

Instructions for dressing the grinding wheel for optimal performance.

Procedure for wet grinding valves for a superior finish and accuracy.

Information on cleaning and refilling the coolant tank.

Recommendations and properties of grinding oil for wet grinding.

Important steps for chucking and grinding valves accurately.

Positioning the left-hand offset rocker arm for grinding.

Using the auxiliary cone for the right-hand offset rocker arm.

Step-by-step guide on operating the quick acting lever chuck.

Instructions for removing and assembling the lever-operated chuck.

Instructions for removing and assembling the quick-acting chuck.

Crucial advice on avoiding wheel dressing during gauge setup and grinding.

Method for adjusting valve length after grinding to maintain tappet settings.

Lists optional accessories for the dressing tool.