SIP B13-13 - User Manual

60
Please dispose of packaging for the product in a responsible
manner. It is suitable for recycling. Help to protect the
environment, take the packaging to the local amenity tip
and place into the appropriate recycling bin.
Never dispose of electrical equipment or batteries in with
your domestic waste. If your supplier offers a disposal facili-
ty please use it or alternatively use a recognised re-cycling
agent. This will allow the recycling of raw materials and help
protect the environment.
Ref: 050716
FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,
OR SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
1
Pillar Drill Range
01700 - 01708
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference.

SIP B13-13 Specifications

General

Brand	SIP
Model	B13-13
Category	Drill
Language	English

Summary

Declaration of Conformity

Safety

Safety Symbols

Explains the meaning of warning and informational symbols used in the manual.

Safety Instructions

Provides essential safety guidelines for operating the pillar drill.

Parts List - 01708

Technical Specifications

Parts List - 01707

Electrical Connection

Guarantee

Getting to Know Your Drill

Assembly Instructions

Operating Instructions

Settings & Adjustments

How to adjust table height, angle, and other settings for operation.

ON; OFF (NVR) SWITCH

Explains the operation of the safety switch for starting and stopping the drill.

Adjusting The Speed

Guides on changing the drill's speed by adjusting belt positions.

Fitting A Drill Bit

Instructions on safely inserting and securing drill bits into the chuck.

Operating The Depth Stop

How to set the desired drilling depth using the depth stop mechanism.

Drilling Operations

Steps for performing drilling tasks, including table and workpiece setup.

Maintenance

Troubleshooting

Parts List - 01700