SIP F32-20 - User Manual

60
Please dispose of packaging for the product in a responsible
manner. It is suitable for recycling. Help to protect the
environment, take the packaging to the local amenity tip
and place into the appropriate recycling bin.
Never dispose of electrical equipment or batteries in with
your domestic waste. If your supplier offers a disposal facili-
ty please use it or alternatively use a recognised re-cycling
agent. This will allow the recycling of raw materials and help
protect the environment.
Ref: 050716
FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,
OR SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
1
Pillar Drill Range
01700 - 01708
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference.

SIP F32-20 Specifications

General

Model	F32-20
Category	Drill
Drill Capacity	32mm
Voltage	230V
Speed Range	150 - 2450 RPM
Number of Speeds	12
Spindle Travel	120mm
Column Diameter	92mm
Type	Floor Drill
Chuck Size	16mm
Motor Power	1.5 kW

Summary

Safety Instructions

Safety Instructions

Provides essential precautions for safe operation and use of the pillar drill.

Technical Specifications

Technical Specifications

Electrical Connection

Connecting to the Power Supply

Assembly Instructions

Column to Base Assembly

Head to Column Assembly

Arbor and Chuck Installation

Operating Instructions

Settings and Adjustments

Procedures for adjusting table height, angle, and other settings.

Speed Adjustment

Details how to change the drill's spindle speed using belt adjustments.

Drill Bit Fitting

Instructions for securely installing straight shank and morse taper drill bits.

Depth Stop Operation

Drilling Process

Step-by-step guide for performing drilling tasks safely and effectively.

Maintenance

Cleaning and Maintenance

Troubleshooting

Troubleshooting

Common problems and their probable causes and solutions for the pillar drill.