SIP B16-16 - User Manual

60
Please dispose of packaging for the product in a responsible
manner. It is suitable for recycling. Help to protect the
environment, take the packaging to the local amenity tip
and place into the appropriate recycling bin.
Never dispose of electrical equipment or batteries in with
your domestic waste. If your supplier offers a disposal facili-
ty please use it or alternatively use a recognised re-cycling
agent. This will allow the recycling of raw materials and help
protect the environment.
Ref: 050716
FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,
OR SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
1
Pillar Drill Range
01700 - 01708
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference.

SIP B16-16 Specifications

General

Type	Bench Drill
Drill Capacity	16mm
Chuck Size	16mm
Speeds	5
Model	B16-16

Summary

Declaration of Conformity

Safety Information

Safety Symbols Used

Explanation of symbols used throughout the manual to denote hazards.

Safety Instructions and Precautions

Essential safety guidelines and precautions for operating the drill.

Technical Specifications

Electrical Connection and Safety

Assembly Instructions

Fit Head Onto Column

Fit Arbor and Chuck

Operating Instructions

Settings and Adjustments

On;Off (NVR) Switch Operation

Explanation of the No Volt Release switch function for starting/stopping.

Adjusting Speed (Other Models)

Fitting a Drill Bit

Procedures for fitting straight shank and morse taper drill bits.

Operating the Depth Stop (Model 01700)

Operating the Depth Stop (Other Models)

Drilling Operations Guide

Step-by-step guide for performing drilling operations.

Troubleshooting Common Problems