32
Fig. 17
V = oil (12 chains)
M = multipurpose grease (17 nipples)
R = liquid grease VISKOMA R
P = HYPENOL (SAE 90)
Z = gears – multipurpose grease
GEAR BOXES "P"
There must always be enough oil in the gear
boxes (fig. 18, 19). Check oil level every 50
hours of work with the screw “H”. In the gear
box (fig. 18) there is 1,5 l of oil SAE 90
HYPENOL and in the gear box (fig. 19) 2,5 l
of the same type of oil. For the first time
change oil after first 20 hours of work, and
afterwards at least once a year. Oil can be
drained by unscrewing the screw “I” (fig. 18,
19). Fill the oil through the screw hole “O”. At
the end of the season clean well the
harvester, check technical functioning,
release V-belts, oil the chains, grease all
nipples and store the machine on a dry place,
unexposed to weather influences.
Fig. 18 Fig. 19
To Next Page
Loading...
