Need help?Do you have a question about the SIP DISC 220 F ALP and is the answer not in the manual?
General| Brand | SIP |
|---|---|
| Model | DISC 220 F ALP |
| Category | Farm Equipment |
| Language | English |
Defines the intended agricultural use of the machine and manufacturer liability for misuse.
Provides essential safety rules, warnings, and precautions for operating the machine.
Specific safety considerations and best practices for machines attached to tractors.
Welcomes the buyer and introduces the manual's purpose and importance.
Guides users on how to order replacement parts, emphasizing the use of original SIP parts.
Introduces the manual and explains the location and meaning of safety decals on the machine.
Lists key specifications for DISC models, including working width, weight, and power requirements.
Explains how to calculate tractor ballast for stability and safety, referencing EN ISO 4254-10.
Highlights critical safety steps before preparing the mower, such as PTO shaft safety.
Details the process of connecting the mower to the tractor's three-point hitch and setting initial parameters.
Guides on connecting and adjusting the PTO shaft, including safety precautions and length settings.
Explains connecting hydraulic lines and setting up hydraulic relief for proper cutter bar function.
Describes how to set the machine for the desired cutting width, typically 1000-1500 mm.
Outlines checks and preparations before starting work or transporting the mower, including safety measures.
Instructions on safely raising the cutter bars when moving between rows, minding PTO shaft angles.
Explains the mower's built-in safety clutch and how it protects against obstacles during operation.
Step-by-step guide on safely detaching the mower from the tractor, including securing it properly.
Emphasizes safety precautions during all maintenance and repair work, especially engine shutdown.
Covers general upkeep, cleaning, greasing, and lubrication intervals for longevity.
Detailed instructions on how to safely replace worn or damaged mower blades, ensuring correct installation.
Procedure for safely disconnecting the mower from the tractor, ensuring it's on a stable surface.
Procedures for replacing blade holders, mower blades, screws, and safety pins due to wear or damage.
Steps for storing the machine safely during winter, including cleaning and lubrication, to prevent damage.
Actions required to get the mower ready for operation at the start of a new season, including checks and lubrication.
Information on optional accessories like cones and sliders for adjusting cutting height and swath width.
Details on disc extensions for narrower swaths and shifting the cutter bar during mowing for maneuverability.
How to connect and adjust mechanical relief springs for maintaining consistent cutter bar pressure on uneven surfaces.
To Next Page